
The AirTAC SEJ Adjustable Cylinder SEJ40X150-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X150-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 10 mm mechanical stroke adjustment. A rod exits both ends, yielding identical annulus areas and an equal drive force of 528 N in both directions at 0.5 MPa. The rear stop screw lets you dial the retract end position down to an effective 140 mm stroke range without swapping hardware.
This bore 40 unit features a PT1/4 port, a Ø16 mm rod, and an M12x1.25 rod-end thread. It includes a standard magnet (-S) for CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the load near stroke end, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X150-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 10 mm (140–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm window to perfect insertion depth on a PCB assembly line, using the 528 N both-way force to press and retract pins equally.
Quickly reposition the retract stop from 150 mm to 140 mm on a packaging machine when switching to a shallower box format.
Commission a new robotic gripper by fine-tuning the jaw opening distance against a hard stop before locking the rear screw.
Verify the 10 mm adjustment window covers your fine-tuning span before ordering. If 528 N at 0.5 MPa is excessive, step down to the bore 32 SEJ (345 N both ways); if you need more thrust, step up to the bore 50 SEJ (825 N both ways). For a fixed end position that never changes, a standard SED double-rod cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, specify an external rod lock. At 150 mm stroke, mount this cylinder using Basic, FA, LB, TC, FTC, TCM1, or TCM2 brackets and use external guides to manage side loads.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 10 mm window. You can set the effective stroke anywhere from 140 mm up to the full 150 mm, then lock it in place.
Because it is a double-rod cylinder, force is equal in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.