
The AirTAC SEJ Adjustable Cylinder SEJ40X80-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 60–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X80-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions for an equal force of 528N each way at 0.5 MPa. By turning the stop screw on the back rod, you can mechanically shorten the retract stroke, yielding an effective range of 60-80mm.
This cylinder uses an extruded aluminum barrel without external tie rods and includes field-adjustable air cushions at both ends to decelerate the load near stroke end. The PT1/4 port and 16mm rod provide stable operation, and because this specific SKU lacks the -S magnet option, it does not support position sensing without external switches.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X80-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 20 mm (60–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Quickly reposition the mechanical stop for different carton sizes on a conveyor without swapping hardware, using the back-rod screw to set the exact end point.
The 20mm adjustment window is ideal for dialing in a precise end position during machine commissioning or matching a variable stop. If you need less force, stepping down to the 32mm bore gives 345N both ways at 0.5 MPa; if your application requires more push, stepping up to the 50mm bore provides 825N both ways. If your stroke never changes after setup, a fixed-stroke SED cylinder is sufficient. Remember that the air cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder. Ensure your ISO 15552 replacement matches the 80mm stroke, 20mm window, PT1/4 port, and chosen mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke. The 20mm adjustment window means the effective stroke can be dialed anywhere from 60mm up to the full 80mm, which you then lock in place.
Because a rod exits both ends, the force is identical in both directions: 528N at 0.5 MPa, 739N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.