verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X80-50SN

The AirTAC SEJ Adjustable Cylinder SEJ40X80-50SN is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke80 mm
  • Adjust window50 mm
  • Effective stroke30–80 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$78.39 $85.89Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X80-50SN

The AirTAC SEJ40X80-50SN is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. This allows you to dial the retract end-position down from the 80 mm nominal stroke to a 30 mm effective stroke, perfect for fine-tuning a stop during machine commissioning without swapping hardware.

This NBR-sealed unit includes a standard magnet for position sensing and uses a PT1/4 port. The retract stroke is set via a mechanical stop screw on the rear rod; you lock it after setting your exact end-point. Adjustable air cushions at both ends decelerate the load near the stroke ends, operating at speeds from 30 to 800 mm/s.

Airtac SEJ Adjustable Cylinder SEJ40X80-50SN Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X80-50SN
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke80 mm
Adjustment window50 mm (30–80 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X80-50SN

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×80Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X80-50SN Is Used

tune

Press Stroke Calibration

Dial in the exact 30-80 mm contact depth on a small pneumatic press. The equal 739 N both-way force (at 0.7 MPa) ensures consistent push and pull clamping pressure.

swap_horiz

Packaging Changeover

Adjust the retract stop on the fly when switching box sizes on a packaging line. The 50 mm window lets you reposition the 528 N actuator without machining new spacers.

precision_manufacturing

Component Seating

Trial-position delicate electronic parts. The rear stop screw locks the 30-80 mm stroke precisely, while the double-rod design prevents rotational drift during the seating cycle.

Is the Airtac SEJ Adjustable Cylinder SEJ40X80-50SN the Right Cylinder?

Verify the 50 mm adjustment window covers your required end-position range (30-80 mm). If you need less fine-tune travel, a fixed-stroke SED saves cost. For sizing both ways: the adjacent bore down is 32 mm (345 N both ways at 0.5 MPa) and the next bore up is 50 mm (825 N both ways at 0.5 MPa). This 40 mm bore yields 739 N each way at 0.7 MPa.

If your application requires fail-safe position holding on air loss, note that the stop screw and air cushions only set the mechanical end and decelerate the load—they do not lock the rod. You will need an external rod lock or a BSED variant. For ISO 15552 replacement matching, confirm the 80 mm stroke, 50 mm window, PT1/4 port, and your required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X80-50SN FAQ

The -50 code indicates a 50 mm adjustment window. A stop screw on the rear rod lets you mechanically shorten the retract stroke from the 80 mm nominal down to 30 mm effective. You lock the screw once the desired end-position is set.

Because it is a double-rod cylinder, force is equal in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X80-50SN

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X80-50SN and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.