
The AirTAC SEJ Adjustable Cylinder SEJ50X100-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X100-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. By turning the stop screw on the back rod, you can mechanically shorten the retract stroke anywhere within the 60 to 100 mm effective range, then lock it down for precise commissioning without swapping hardware.
Dimensionally interchangeable per ISO 15552 (extruded aluminum barrel, no external tie rods), this 50 mm bore unit runs at 30-800 mm/s and carries field-adjustable air cushions at both ends to decelerate the load near the stroke limits. It uses a PT1/4 port, a Ø20 mm rod with an M16x1.5 thread, and since this specific SKU lacks the -S magnet option, it will not directly host CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X100-40 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 40 mm (60–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 60-100 mm closing position on a light assembly press, leveraging the 825 N both-way force to clamp thin sheet metal precisely before locking the stop screw.
Adjust the retract stroke on the fly to handle different carton heights on a packaging conveyor, using the equal double-rod force to consistently push folding flaps.
Fine-tune the extension stop during a new product line trial to seat bearings perfectly without over-travel, relying on the 1154 N available at 0.7 MPa.
This 40 mm adjustment window is ideal for dialing in a precise end-position during machine commissioning or accommodating part changeovers between 60 and 100 mm. If you need less force, the next bore down is 40 mm delivering 528 N both ways at 0.5 MPa; if your application requires more thrust, step up to the 63 mm bore providing 1402 N each way at 0.5 MPa. If your stroke never needs on-machine tuning, a fixed-stroke SED cylinder provides the same double-rod stability in a shorter overall length.
When matching an ISO 15552 replacement, verify your 50 mm bore, 100 mm nominal stroke, 40 mm window, PT1/4 port, and required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that the adjustable air cushion only decelerates the load near stroke end—it is not a lock. A plain SEJ does not hold position on air loss; for fail-safe holding, look to a BSED series or an external rod lock.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically dial the retract stroke back by up to 40 mm. This gives an effective stroke range of 60 to 100 mm, which you lock in place after setting the exact end-position on your machine.
Because it is a double-rod cylinder, the force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.