
The AirTAC SEJ Adjustable Cylinder SEJ50X125-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 50–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 825 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can mechanically dial the retract stroke down from the 125 mm nominal to a 50 mm minimum, allowing precise end-position tuning directly on the machine without swapping hardware.
This 50 mm bore unit includes a magnet for CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length. The extruded aluminum barrel omits external tie rods for a clean profile, and the PT1/4 porting pairs with a Ø20 mm rod threaded M16x1.5. The dual-rod design also enhances resistance to side loads and guides against rotation.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 75 mm (50–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 50 to 125 mm to accommodate different part heights during production line changeovers, using the 825 N both-way force to push varying jigs.
Fine-tune the exact insertion depth of a pin or bushing on an assembly press by adjusting the back-rod stop screw, ensuring precise mechanical ends without reprogramming controls.
Use the 50-125 mm effective range to trial different stopping points for a new packaging fold mechanism, locking the back rod after finding the optimal crush distance.
Confirm the 75 mm adjustment window covers your required 50-125 mm effective range before selecting. If your application needs less force, the next bore down is 40 mm, providing 528 N each way at 0.5 MPa. If you need more thrust, stepping up to the 63 mm bore yields 1402 N both ways at 0.5 MPa. If the exact end position is fixed and never varies, a fixed-stroke SED cylinder is sufficient. For holding a load on air loss, note that this cylinder does not function as a lock; the adjustable cushion only decelerates near stroke end, so an external rod lock is required for fail-safe holding. When matching an ISO 15552 replacement, verify the 125 mm nominal stroke, 75 mm window, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
It features a stop screw on the back rod that lets you mechanically shorten the retract stroke. The 75 mm adjustment window allows an effective stroke range of 50 to 125 mm, which you set and lock directly on the machine.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.