
The AirTAC SEJ Adjustable Cylinder SEJ50X25-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 15–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X25-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly equal in both directions at 825 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end position to anywhere in an effective 15-25 mm stroke range without swapping hardware.
This extruded aluminum barrel unit includes field-adjustable air cushions at both ends to tame kinetic energy near stroke end. It uses a PT1/4 port, a Ø20 mm rod with an M16x1.5 thread, and operates at 30-800 mm/s. This SKU lacks a magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X25-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 10 mm (15–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 15-25 mm retract position during machine commissioning to match varying part heights on a packaging line, using the equal 825 N both-way force for stable lifting.
Quickly adjust the mechanical end position within the 10 mm window when switching a conveyor line to a different product thickness, avoiding the need to physically swap cylinder hardware.
Fine-tune the exact clamping end-point on a test jig by turning the back-rod stop screw, testing various positions before locking the final 25 mm maximum stroke setting.
Confirm the 10 mm adjustment window covers your required end-position variance; the effective stroke spans 15 to 25 mm. If you need less force, step down to the 40 mm bore (528 N each way at 0.5 MPa); if pushing heavier loads, step up to the 63 mm bore (1402 N each way at 0.5 MPa). If your stroke length is fixed and never varies, a standard SED double-rod cylinder provides the same twin-rod stability without the adjustment mechanism.
Because the stroke is under 300 mm, side-load stress on the rod bearings is minimal, though external guides are always recommended for heavy lateral loads. Remember that the adjustable stop screw and air cushions only set the mechanical end and decelerate the piston; a plain SEJ does not hold position on air loss. For fail-safe load holding, consider an external rod lock. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract end has a 10 mm adjustment window via a stop screw on the back rod. You can set the effective stroke anywhere from 15 mm up to the nominal 25 mm. Once dialed in, the mechanism is locked to maintain that precise end position.
Because a rod exits both ends, the force is identical in both directions. It generates 825 N at 0.5 MPa and 1154 N at 0.7 MPa, with a maximum output of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.