verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X300-100

The AirTAC SEJ Adjustable Cylinder SEJ50X300-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 200–300mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke300 mm
  • Adjust window100 mm
  • Effective stroke200–300 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$126.77 $134.27Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X300-100

The AirTAC SEJ50X300-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window, allowing the effective retract stroke to be dialed in from 200 mm up to 300 mm. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 825 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods.

A stop screw on the back rod mechanically sets the end position, which you lock in place after fine-tuning on the machine. Because the nominal stroke is 300 mm, external guides are recommended to manage side loads on the extended rod. This unit lacks a magnet (-S) for position sensing.

Airtac SEJ Adjustable Cylinder SEJ50X300-100 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X300-100
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke300 mm
Adjustment window100 mm (200–300 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X300-100

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×300Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X300-100 Is Used

tune

Packaging Flap Folding

Dial in the 200-300 mm retract stroke to perfectly match varying carton depths on a packaging line, using the 825 N both-way force to fold heavy cardboard flaps.

swap_horiz

Assembly Press Changeover

Switch between part heights on a multi-product assembly press by adjusting the back-rod stop screw 100 mm, avoiding hardware swaps while delivering 1154 N at 0.7 MPa.

precision_manufacturing

Fixture Trial Positioning

Use the adjustable end-stop to safely probe and set the exact clamping position on new machined fixtures during commissioning before locking the mechanism down.

Is the Airtac SEJ Adjustable Cylinder SEJ50X300-100 the Right Cylinder?

Confirm the 100 mm adjustment window covers your required end-position range before ordering. If you need less force, the adjacent 40 mm bore provides 528 N both ways at 0.5 MPa; if your application requires more thrust, step up to the 63 mm bore for 1402 N both ways. If you do not need variable end-position tuning, a fixed-stroke SED double-rod cylinder is sufficient. The air cushion at both ends is field-adjustable to decelerate the load near stroke end, but it is not a fail-safe lock; for position holding on air loss, use an external rod lock. This SKU is dimensionally interchangeable per ISO 15552 with a PT1/4 port and M16x1.5 rod thread.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X300-100 FAQ

The retract end features a stop screw on the back rod that allows you to dial the effective stroke down by up to 100 mm. This gives an effective stroke range of 200 mm to 300 mm, which you lock in place after setting the exact end position on the machine.

Because the double-rod design yields identical annulus areas, force is equal in both directions. It provides 825 N each way at 0.5 MPa, 1154 N each way at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X300-100

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X300-100 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.