verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X60-30

The AirTAC SEJ Adjustable Cylinder SEJ50X60-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 30–60mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke60 mm
  • Adjust window30 mm
  • Effective stroke30–60 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$90.95 $98.45Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X60-30

The AirTAC SEJ50X60-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable retract stroke window. You can dial the effective stroke from 30mm up to 60mm via a stop screw on the back rod, letting you fine-tune the exact end position during machine commissioning without swapping hardware. A rod exits both ends, ensuring the annulus area remains identical; this delivers equal force in both directions, outputting 825 N each way at 0.5 MPa.

This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to decelerate the load near stroke end. This SKU ships without a magnet (-S), meaning no CMSE or DMSE position sensors can be fitted. The rear rod can support an external cam or guide to help resist side loading.

Airtac SEJ Adjustable Cylinder SEJ50X60-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X60-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke60 mm
Adjustment window30 mm (30–60 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X60-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×60Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X60-30 Is Used

precision_manufacturing

Press Stroke Calibration

Dial in the exact 30-60mm clamping stroke on a light assembly press to compensate for material thickness variance, applying 825 N of equal both-way force.

swap_horiz

Packaging Changeover

Adjust the retract stop to handle different carton heights on a packaging conveyor without changing out the entire cylinder assembly.

tune

Robotic Gripper Alignment

Fine-tune the extended end position during robotic arm commissioning, using the back-rod stop screw to match the pick-up coordinate precisely.

Is the Airtac SEJ Adjustable Cylinder SEJ50X60-30 the Right Cylinder?

Confirm the 30mm adjustment window covers your required end-position variance. If you need less fine-tuning, the SEJ50X60-20 offers a 20mm window instead. For power scaling, the adjacent SEJ40 bore provides 528 N both ways at 0.5 MPa, while the larger SEJ63 bore jumps to 1402 N. If you never need to alter the stroke after setup, a fixed-stroke SED50X60 provides the same double-rod mechanics without the adjustment hardware. Note that this plain SEJ does not hold position on air loss; the adjustable cushion and stop screw decelerate and set the mechanical end, but for fail-safe holding you need a BSED or an external rod lock. When replacing an ISO 15552 cylinder, verify the 50mm bore, 60mm stroke, PT1/4 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X60-30 FAQ

A stop screw on the rear rod mechanically shortens the retract stroke. You can dial the effective stroke from 30mm up to the full 60mm. Once the end position is set, you lock the screw in place.

Because it is a double-rod cylinder, the force is identical in both directions. It generates 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X60-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X60-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.