verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X70-40S

The AirTAC SEJ Adjustable Cylinder SEJ50X70-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 30–70mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke70 mm
  • Adjust window40 mm
  • Effective stroke30–70 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$94.67 $102.17Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X70-40S

The AirTAC SEJ50X70-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. A rod exits both ends, yielding an annular area that delivers identical force in both directions—825 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can mechanically shorten the retract stroke, giving an effective range of 30 to 70 mm for precise end-position tuning.

This bore 50 mm unit includes an -S magnet for position detection via CMSE reed or DMSE electronic sensors. It runs at 30-800 mm/s, uses PT1/4 ports, and features field-adjustable air cushions at both ends to manage deceleration near the stroke limits. The extruded aluminum barrel is dimensionally interchangeable per ISO 15552, and the extended rear rod can support a flag or cam while guides help resist rotation.

Airtac SEJ Adjustable Cylinder SEJ50X70-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X70-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke70 mm
Adjustment window40 mm (30–70 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X70-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×70Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X70-40S Is Used

tune

Press Fit Dial-In

Delivering 825 N both ways at 0.5 MPa, use the 30-70 mm retract adjustment to precisely set the insertion depth for bearing press fits without swapping hardware.

swap_horiz

Packaging Changeover

When packaging lines switch between different box sizes, dial the back-rod stop screw to match the new carton stop position rapidly.

precision_manufacturing

Welding Tip Alignment

Use the equal both-way force and 40 mm stroke window to fine-tune the exact contact position of welding tips during machine commissioning.

Is the Airtac SEJ Adjustable Cylinder SEJ50X70-40S the Right Cylinder?

Verify the 40 mm adjustment window covers your required end-position variance; this model dials the retract stroke down from 70 mm to a 30 mm minimum. If you need less output, the 40 mm bore neighbor provides 528 N both ways at 0.5 MPa; if scaling up, the 63 mm bore offers 1402 N at 0.5 MPa. For applications needing a fixed end position without commissioning tweaks, the SED double-rod cylinder is a simpler alternative.

When matching a replacement, confirm the 70 mm nominal stroke, 40 mm window, PT1/4 port, and M16x1.5 rod thread. Note that the adjustable air cushion only decelerates the load near stroke end—it is not a mechanical lock. A plain SEJ will not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. Since the stroke is under 300 mm, side-load concerns are minimal, but external guides should still be used for heavy lateral loads.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X70-40S FAQ

The 40 mm adjustment window lets you dial the retract stroke from a 30 mm minimum up to the 70 mm nominal maximum. You set the mechanical end position with a stop screw on the back rod, then lock it in place.

Because a rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X70-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X70-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.