
The AirTAC SEJ Adjustable Cylinder SEJ50X80-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 60–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X80-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end from 60mm up to 80mm, enabling precise end-position tuning without swapping hardware.
This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to decelerate the load near stroke limits, and this specific SKU lacks a magnet, meaning no CMSE or DMSE position sensor can be mounted.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X80-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 20 mm (60–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 60-80mm retract to precisely time stamping ejection, utilizing the equal 825 N both-way force to reliably pull parts without rotating the load.
Adjust the retract stop on the fly when switching box sizes, using the 20mm window to hit varying push-back distances without changing cylinder mounts.
Fine-tune the actuation end-point to match conveyor lane widths perfectly, relying on the double-rod design for stable guiding and equal force.
This 50mm bore provides 825 N both ways at 0.5 MPa. If your application needs less force, the 40mm bore steps down to 528 N; if you need more push or pull, the 63mm bore jumps to 1402 N. The 20mm adjustment window is ideal for commissioning fine-tunes or matching a variable stop. If your end position never changes, a fixed-stroke SED is sufficient. Remember, the air cushion and stop screw decelerate and set the mechanical end, but a plain SEJ does not hold position on air loss—for fail-safe holding, look to a BSED or an external rod lock. As an ISO 15552 cylinder, it matches standard bore, stroke, port PT1/4, and mounting footprints.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The SEJ50X80-20 has a stop screw on the back rod that lets you mechanically shorten the retract stroke by up to 20mm. The effective stroke range is 60-80mm, which you set and lock during commissioning.
Because it is a double-rod cylinder, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.