verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X150-10

The AirTAC SEJ Adjustable Cylinder SEJ63X150-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke150 mm
  • Adjust window10 mm
  • Effective stroke140–150 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$122.59 $130.09Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X150-10

The AirTAC SEJ63X150-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable retract stroke window. You can dial the retract end from 140mm to 150mm to perfectly match a mechanical stop without swapping hardware. Because a rod exits both ends, the annular area is symmetrical, yielding an equal output force of 1402 N each way at 0.5 MPa.

This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to manage deceleration over the 36mm cushion length. This specific SKU lacks a magnet, meaning it is not equipped for CMSE or DMSE position sensing out of the box.

Airtac SEJ Adjustable Cylinder SEJ63X150-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X150-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke150 mm
Adjustment window10 mm (140–150 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X150-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×150Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X150-10 Is Used

tune

Conveyor Stop Blade Calibration

Adjusting the retract position by up to 10mm to align a pneumatic stop blade precisely with varying package sizes on a packaging conveyor line.

settings

Dispenser Nozzle Gap Setting

Fine-tuning the nozzle clearance on an adhesive dispensing head to accommodate different substrate thicknesses without remounting the cylinder.

Is the Airtac SEJ Adjustable Cylinder SEJ63X150-10 the Right Cylinder?

The 10mm adjustment window is ideal for fine-tuning a precise end-position during machine commissioning rather than serving as a broad range changer. If your application needs less force, the adjacent 50mm bore provides 825 N each way at 0.5 MPa; if you need more power, step up to the 80mm bore for 2268 N at 0.5 MPa. If your stroke never varies after setup, a fixed-stroke SED cylinder is a simpler alternative. Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss, so an external rod lock is required for fail-safe holding. When replacing an ISO 15552 cylinder, verify the 63mm bore, 150mm stroke, PT3/8 port, and mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 sets.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X150-10 FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 10mm window. You can set the effective stroke anywhere from 140mm up to the full 150mm, then lock the screw in place for consistent operation.

Because the rod exits both ends, force is equal in both directions. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and reaches a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X150-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X150-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.