
The AirTAC SEJ Adjustable Cylinder SEJ63X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X150-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 1402 N each way at 0.5 MPa. The retract stroke is mechanically tunable from 100 mm up to the 150 mm nominal maximum via a back-rod stop screw. This allows you to fine-tune the exact end position directly on the machine without swapping hardware. The extruded aluminum barrel contains no external tie rods, and the included -S magnet enables precise end-of-stroke detection using CMSE reed or DMSE electronic sensors.
Beyond the adjustable stroke, this 63 mm bore cylinder features field-adjustable air cushions at both ends to decelerate the load near the stroke limits. It operates at speeds from 30-800 mm/s and uses a PT3/8 port.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 100-150 mm closing position on a small pneumatic press.
Adjust the retract stop to handle varying product heights on a conveyor transfer station. The 50 mm mechanical window lets operators match new part profiles quickly without changing out the cylinder.
Use the back-rod stop screw to test end positions on a machining jig. The 1962 N both-way force at 0.7 MPa holds the workpiece securely while the exact stroke is finalized on the machine.
Confirm the 50 mm adjustment window covers your required positioning range, providing a 100-150 mm effective stroke. If you need less fine-tuning, a fixed-stroke SED cylinder is simpler and shorter. When sizing force, note the 50 mm bore delivers 825 N both ways at 0.5 MPa, while stepping up to the 80 mm bore yields 2268 N. The SEJ63X150-50S delivers 1402 N at 0.5 MPa and 1962 N at 0.7 MPa. Use this model when matching variable stop positions or changing part heights. To replace an ISO 15552 unit, match the 63 mm bore, 150 mm stroke, PT3/8 port, and your mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). A plain SEJ does not hold position on air loss; the stop screw and cushion only set the mechanical end and decelerate the load. For fail-safe holding, specify a BSED or an external rod lock. For strokes at or above 300 mm, external guides are recommended to manage side loads.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. You can dial the effective stroke anywhere from 100 mm up to the 150 mm nominal maximum. Lock the screw after setting your desired end position.
Because it is a double-rod cylinder, the force is identical in both directions. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.