
The AirTAC SEJ Adjustable Cylinder SEJ63X200-30SFA is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 170–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X200-30SFA is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical extend and retract forces—delivering 1402 N each way at 0.5 MPa. An integrated magnet supports CMSE reed and DMSE electronic sensors for exact position tracking.
This variant features a 30 mm adjustable stroke window, letting you mechanically dial the retract end from 170 mm up to 200 mm via a rear stop screw. It carries an FA front mounting bracket and a PT3/8 port. The extruded aluminum barrel omits external tie rods, ensuring clean, dimensionally interchangeable ISO 15552 mounting.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X200-30SFA |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 30 mm (170–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to set precise die clearance on a stamping press, utilizing the 1962 N both-way force to consistently clamp sheet metal blanks at 0.7 MPa.
Adjust the effective stroke between 170 mm and 200 mm during format changeovers on a carton erector, using the equal double-rod force to push varying box sizes without rebalancing pressure.
Fine-tune the mechanical stop position on a conveyor transfer line by locking the rear stop screw, leveraging the 1402 N retract force to halt heavy pallets accurately at 0.5 MPa.
Verify the 30 mm adjustment window covers your required end-position range. If you need less force, the adjacent 50 mm bore provides 825 N at 0.5 MPa; stepping up to the 80 mm bore yields 2268 N. If the stroke never varies after commissioning, a fixed-stroke SED saves complexity. The FA mount handles front-face loads, but for strokes at or beyond 300 mm, external guides are recommended to prevent rod side-loading.
This cylinder is dimensionally interchangeable per ISO 15552—match the 63 mm bore, 200 mm stroke, PT3/8 port, and FA mount for direct replacements. The adjustable air cushion decelerates the load near stroke ends but does not hold position on air loss; for fail-safe holding, specify an external rod lock or BSED variant.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 30 mm. This gives you an effective stroke range of 170 mm to 200 mm, allowing you to fine-tune the end position on the machine before locking it down.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.