
The AirTAC SEJ Adjustable Cylinder SEJ63X300-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 250–300mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X300-50 is a double-acting, double-rod ISO 15552 profile cylinder engineered for precise end-position tuning. A rod exits both ends, yielding identical annulus areas so output is exactly 1402 N at 0.5 MPa in both extend and retract directions. The retract stroke is mechanically adjustable via a back-rod stop screw over a 50 mm window, giving an effective travel range of 250 to 300 mm.
This SKU has no magnet, meaning position sensing is not supported without modification. It features field-adjustable air cushions at both ends to manage deceleration across its 30-800 mm/s speed range, and uses an extruded aluminum barrel free of external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X300-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 300 mm |
| Adjustment window | 50 mm (250–300 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 250-300 mm stop during setup to perfectly match a 1402 N clamping distance without machining custom spacers.
Quickly adjust the retract end by up to 50 mm to accommodate varying product heights on a packaging line, using equal force both ways.
Fine-tune the end point on a machining fixture by turning the back-rod stop screw, locking it once the optimal 1402 N contact position is found.
Verify the 50 mm adjustment window safely covers your required end-position variance. If you need less force, the 50 mm bore provides 825 N at 0.5 MPa; if scaling up, the 80 mm bore delivers 2268 N at 0.5 MPa. If your stroke never changes after commissioning, a fixed-stroke SED saves length and cost.
At 300 mm nominal stroke, ensure external guides carry side loads to prevent rod binding. The adjustable air cushion decelerates the load near stroke end but does not lock position on air loss; for fail-safe holding, specify an external rod lock. This PT3/8 ported unit is dimensionally interchangeable per ISO 15552 when matching bore, stroke, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. You can set the effective stroke anywhere from 250 mm up to the full 300 mm, then lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.