
The AirTAC SEJ Adjustable Cylinder SEJ63X60-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 10–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X60-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. You can mechanically dial the retract end from 10mm up to the nominal 60mm via a stop screw on the back rod.
This unit includes a magnet (-S) for position sensing with CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to manage deceleration over the 36mm cushion length, and uses a PT3/8 port with a 20mm rod end threaded M16x1.5.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X60-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 50 mm (10–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 10 to 60mm clamping distance during press commissioning, utilizing the 1402 N both-way force for consistent workholding.
Quickly adjust the retract stop to match new part heights on a machining line, avoiding hardware swaps while maintaining 1962 N at 0.7 MPa.
Safely test end-of-stroke positions on a new fixture by mechanically limiting the retract distance, relying on the equal push and pull forces.
This 63mm bore provides 1402 N both ways at 0.5 MPa. If your application needs less force, the adjacent 50mm bore yields 825 N; if you require more, stepping up to the 80mm bore provides 2268 N at the same pressure. The 50mm adjustment window is ideal for machine commissioning, allowing you to fine-tune the end position from 10 to 60mm without changing hardware.
If your end position is permanently fixed, a standard SED double-rod cylinder is sufficient. Note that this SEJ does not hold position on air loss; the cushion and mechanical stop only set the end and decelerate near stroke end, so for fail-safe holding you need an external rod lock. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The 50mm adjustment window lets you mechanically dial the retract stroke down from the nominal 60mm to a minimum effective stroke of 10mm using the back-rod stop screw.
Because the rod exits both ends, force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.