verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X80-30S

The AirTAC SEJ Adjustable Cylinder SEJ63X80-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 50–80mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke80 mm
  • Adjust window30 mm
  • Effective stroke50–80 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$117.47 $124.97Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X80-30S

The AirTAC SEJ63X80-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is perfectly balanced at 1402 N each way at 0.5 MPa. You can dial the retract end from 50 mm up to the nominal 80 mm.

This bore uses a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. The -S option equips a magnet for CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends absorb kinetic energy near stroke end, while the back-rod stop screw lets you lock the exact end position on the machine.

Airtac SEJ Adjustable Cylinder SEJ63X80-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X80-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke80 mm
Adjustment window30 mm (50–80 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X80-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×80Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X80-30S Is Used

precision_manufacturing

Welding Fixture Calibration

Delivering 1402 N of equal both-way force, the 30 mm retract window lets you fine-tune the exact 50-80 mm electrode contact height during robotic welding commissioning.

tune

Dispenser Trial Positioning

Test adhesive bead placement on varying part heights by adjusting the retract stroke on the fly, locking the back-rod stop screw once the perfect 50-80 mm gap is found.

Is the Airtac SEJ Adjustable Cylinder SEJ63X80-30S the Right Cylinder?

This 63 mm bore delivers 1962 N at 0.7 MPa. If you need less force, step down to the 50 mm bore (825 N at 0.5 MPa); for heavier drives, step up to the 80 mm bore (2268 N at 0.5 MPa). The 30 mm adjustment window is ideal for dialing in precise end stops during commissioning.

If your stroke never changes, a fixed-stroke SED saves complexity. Remember the adjustable cushion decelerates the load but does not hold position on air loss; for fail-safe holding, use an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X80-30S FAQ

The 30 mm stop screw window lets you mechanically shorten the retract stroke from the 80 mm nominal down to 50 mm. You set the exact end position and lock the back-rod mechanism in place.

Because the rod exits both ends, force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X80-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X80-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.