
The AirTAC SEJ Adjustable Cylinder SEJ63X85-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 55–85mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X85-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window, yielding an effective travel range of 55 to 85mm. A rod exits both ends, ensuring the output force remains identical in extend and retract directions. It delivers about 1402 N each way at 0.5 MPa.
You dial in the exact retract end-position using a stop screw on the back rod, then lock it down for precise machine commissioning. This 63mm bore uses a PT3/8 port, a Ø20mm rod with an M16x1.5 thread, and includes a magnet for CMSE or DMSE sensors. Adjustable air cushions at both ends manage deceleration over the 36mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X85-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 85 mm |
| Adjustment window | 30 mm (55–85 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30mm retract window to match varying part heights during CNC fixture changeovers, using the 1962 N at 0.7 MPa to clamp workpieces securely.
Act as an adjustable mechanical stop on a packaging conveyor, fine-tuning the 55-85mm stroke on the machine floor without swapping hardware.
Test optimal push distances in lab automation, leveraging the equal both-way 1402 N force to push and pull test samples accurately.
Verify the 30mm adjustment window safely covers your required end-position variance within the 55-85mm range. If you need less force, the 50mm bore provides 825 N at 0.5 MPa; if you need more, step up to the 80mm bore yielding 2268 N at 0.5 MPa. If your application never requires position changes after setup, a fixed-stroke SED cylinder is sufficient.
For direct ISO 15552 replacement, match the 63mm bore, 85mm nominal stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw only decelerate and set the mechanical end; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 30mm. For the SEJ63X85-30S, this creates an effective stroke range of 55 to 85mm, which you lock in place during commissioning.
Because it is a double-rod cylinder, the force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.