
The AirTAC SEJ Adjustable Cylinder SEJ80X100-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-50S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding equal force in both directions at about 2268 N each way at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end over a 50 mm window, providing an effective stroke range of 50 to 100 mm.
This extruded aluminum profile cylinder features field-adjustable air cushions at both ends to manage deceleration. Equipped with a standard magnet, it supports CMSE reed and DMSE electronic sensors for position detection. The PT3/8 port and M20x1.5 rod thread match standard SE series hardware.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying die heights during production changeovers, using the 2268 N both-way force to reliably clamp and lift tooling.
Adjust the mechanical stop on the fly to sort different carton sizes on a packaging line, leveraging the equal double-rod force for consistent diverting speed.
Fine-tune the end-of-stroke position during initial setup without machining spacers, locking the back-rod screw once the exact 50-100 mm travel is achieved.
Verify the 50 mm adjustment window covers your positioning needs, giving an effective stroke of 50-100 mm. If you need less force, the adjacent 63 mm bore provides 1402 N both ways at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N. If the exact end position never changes after commissioning, a fixed-stroke SED cylinder is sufficient.
The stop screw sets the mechanical end position and decelerates near stroke end, but it does not hold position on air loss. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 80 mm bore, 100 mm nominal stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. This gives an effective stroke range of 50 to 100 mm. You dial in the exact end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.