
The AirTAC SEJ Adjustable Cylinder SEJ80X125-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 105–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X125-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, yielding an effective travel range of 105-125mm. A rod exits both ends, meaning the annulus area is identical in both directions. This provides equal force at 2268 N each way at 0.5 MPa.
You dial in the retract end position using a mechanical stop screw on the back rod, then lock it down for precise machine commissioning. This 80mm bore variant uses a PT3/8 port, a 25mm rod with an M20x1.5 thread, and includes a magnet for CMSE or DMSE sensors. Adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X125-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 20 mm (105–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20mm window to perfectly seat a 2268N press die at 0.5MPa without machining custom spacers.
Adjust the retract end from 105 to 125mm to accommodate varying pallet heights on a single conveyor line.
Fine-tune the end stop during R&D trials to find the exact clamping distance before finalizing a machine design.
Verify the 20mm adjustment window covers your positioning range. If you need less force, the adjacent 63mm bore provides 1402 N at 0.5 MPa; if you need more, step up to the 100mm bore for 3681 N at 0.5 MPa. If your end position never changes, a fixed-stroke SED avoids the adjustment mechanism. Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; use an external rod lock for fail-safe holding. When replacing an ISO 15552 cylinder, match the 80mm bore, 125mm stroke, PT3/8 port, and mounting style.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The SEJ80X125-20S features a 20mm adjustment window via a stop screw on the back rod, allowing the effective retract stroke to be dialed from 105mm up to 125mm.
Because it is a double-rod cylinder, force is equal both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.