
The AirTAC SEJ Adjustable Cylinder SEJ80X200-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X200-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. You can dial the retract end from 100mm up to the nominal 200mm via a back-rod stop screw, allowing precise on-machine end-position tuning without swapping hardware.
This 80mm bore unit runs at 30-800 mm/s and includes an -S magnet for CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to manage deceleration, and the extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensionally interchangeable footprint.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X200-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dialing the 100mm retract window lets operators match varying back-gauge stops for different sheet metal depths, using the 3175 N both-way force to move heavy guides.
Adjust the mechanical end position on the fly for multi-height pallet handling lines without replacing the entire cylinder assembly.
Fine-tune the trial stroke end during machine commissioning, locking the back-rod stop screw precisely where the 2268 N @0.5 MPa force meets the target load.
This 100mm adjustment window is ideal for machines needing variable-stop positioning across different part heights. If you need less force, the adjacent 63mm bore provides 1402 N at 0.5 MPa both ways; if you need more, stepping up to the 100mm bore yields 3681 N at 0.5 MPa. If your end position never changes, a fixed-stroke SED cylinder is sufficient. For a direct ISO 15552 replacement, verify your bore, stroke, 100mm window, PT3/8 port, and mounting choice from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set. This cylinder does not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 100mm window. You can dial the effective stroke anywhere from 100mm up to the nominal 200mm, then lock it in place for precise end-positioning.
Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.