Airtac SGC Standard Cylinder SGC125X125S
The AirTAC Airtac SGC Standard Cylinder SGC125X125S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 125mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke125 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
About the Airtac SGC Standard Cylinder SGC125X125S
Generating 6136 N of push force at 0.5 MPa, this double-acting large-bore actuator brings serious thrust to demanding pneumatic setups. It features a 125 mm bore, a 125 mm stroke, and a G1/2 air port. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life.
Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures. The included -S piston magnet enables CMSG, DMSG, and EMSG position switches. Plan for about 3682 N of real work at 0.5 MPa, which means it lifts roughly 313 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC125X125S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X125S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X125S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X125S Is Used
Press Fit Assembly
Drives 313 kg vertical loads to seat heavy bearings into automotive housings using a 2:1 safety margin.
Pallet Squaring Station
Applies 3682 N of working force to align heavy wooden pallets before automated stretch wrapping.
Package Divert Gate
Actuates a heavy-duty routing gate on a high-speed logistics line, utilizing the 125 mm stroke.
Is the Airtac SGC Standard Cylinder SGC125X125S the Right Cylinder?
When sizing this 125 mm bore unit, stepping down is not an option within the SGC family, but stepping up to the 160 mm bore yields 10053 N of push at 0.5 MPa if you need more power. Remember that a standard cylinder drifts when air is lost or a valve centers; the adjustable air cushion only decelerates the piston near stroke end, so add an external rod lock or pilot-operated check valve for held loads. The -S magnet matches perfectly with CMSG, DMSG, or EMSG sensors for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X125S FAQ
This model uses a G1/2 air port. It delivers 6136 N push and 5734 N pull at 0.5 MPa, 8590 N push and 8028 N pull at 0.7 MPa, with a theoretical maximum force of 1251 kgf at 1.0 MPa.
Yes. It is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops into the same foot, flange, and trunnion fixtures. The tie-rod build adds rigidity, and the -S magnet supports CMSG, DMSG, and EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X125S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.