Airtac SGC Standard Cylinder SGC125X380
The AirTAC Airtac SGC Standard Cylinder SGC125X380 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 380mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke380 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X380
Delivering 6136 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles substantial workloads across a 380 mm stroke. The four steel tie rods clamp the aluminium barrel to the covers, providing the high rigidity needed for heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without redesign.
For practical sizing, plan for about 3682 N of real work at 0.5 MPa, which equates to lifting roughly 313 kg vertically with a 2:1 safety margin. The Ø32 mm carbon steel rod has a 20 µm hard chrome plating, and the body features a G1/2 port. Note that this specific SKU lacks the -S magnet, meaning it cannot host CMSG, DMSG, or EMSG position switches without upgrading to the magnet-equipped variant.
Airtac SGC Standard Cylinder SGC125X380 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X380 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X380
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X380 Is Used
Press Die Ejection
Ejects heavy formed steel panels from press dies using a 380 mm stroke, relying on the 6136 N push force to overcome binder strap friction.
Pallet Dispenser Pusher
Separates empty wooden pallets from a magazine stack, utilizing the tie-rod rigidity to handle pallet weight without barrel deflection.
Heavy Crate Diversion
Actuates a routing gate on a packaging line to divert loaded crates, taking advantage of the ISO 15552 mounting interface for easy bracket alignment.
Is the Airtac SGC Standard Cylinder SGC125X380 the Right Cylinder?
When sizing this 125 mm bore unit, verify if the 6136 N push at 0.5 MPa is sufficient, as stepping up to the 160 mm bore yields 10053 N. If your application requires less force, there is no smaller SGC bore available, so you would need to look outside the series. Because this 380 mm stroke is substantial, ensure external guide rails support any side loads to prevent rod bending and premature seal wear.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered; the adjustable 40 mm air cushions only decelerate the piston near the end of stroke and do not act as a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve. Furthermore, without the -S magnet option, this model cannot accept magnetic sensors for end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X380 FAQ
The SGC125X380 provides 6136 N push and 5734 N pull at 0.5 MPa, increasing to 8590 N push and 8028 N pull at 0.7 MPa. The theoretical maximum force is 1251 kgf at 1.0 MPa. It uses a G1/2 air port and features a 40 mm adjustable air cushion at both ends.
No, this specific SKU does not include the -S magnet, so it cannot support CMSG, DMSG, or EMSG magnetic switches. If you require position feedback, you must select the SGC125X380-S variant or use external mechanical limit switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X380
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.