Airtac SGC Standard Cylinder SGC160X1100S
The AirTAC Airtac SGC Standard Cylinder SGC160X1100S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 1100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke1100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X1100S
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is engineered for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers, providing the structural rigidity needed to handle large-bore thrust without flexing. The two-way piston seal incorporates an oil reservoir for continuous lubrication, extending operational life across the 1100 mm stroke.
Equipped with a built-in piston magnet (-S), the unit directly supports CMSG, DMSG, and EMSG reed or electronic switches for position sensing. Plan for about 6032 N of real work at 0.5 MPa, which translates to lifting roughly 512 kg vertically with a 2:1 safety margin. The G3/4 air port and M36x2.0 rod thread handle high flow rates, while the standard TPU seals perform reliably from -20 to +70 C.
Airtac SGC Standard Cylinder SGC160X1100S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X1100S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X1100S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X1100S Is Used
Automotive Press Loading
Pushes heavy stamping blanks into hydraulic presses, utilizing the 10053 N thrust at 0.5 MPa to move large steel sheets reliably over the 1100 mm travel distance.
Pallet Dispenser Mechanism
Extracts empty pallets from high-bay storage magazines, where the 512 kg vertical lift capacity and long stroke handle deep stack retrieval efficiently.
Large Injection Mold Actuation
Drives heavy core pulls on large injection molding machines, relying on the rigid four-tie-rod construction to maintain alignment under high dynamic loads.
Is the Airtac SGC Standard Cylinder SGC160X1100S the Right Cylinder?
When sizing this 160 mm bore, compare your actual load against the 10053 N push and 9425 N pull ratings at 0.5 MPa. If your application requires less force, the smaller 125 mm bore offers 6136 N; if you need substantially more thrust, stepping up to the 200 mm bore provides 15708 N. Because this model features an 1100 mm stroke, supporting the rod end with an external guide is critical to prevent side-load bending and premature seal wear over such a long extension distance.
The integrated magnet allows seamless mounting of CMSG, DMSG, or EMSG sensors. Remember that the adjustable 50 mm air cushions only decelerate the piston near the end caps; they do not function as a brake. If the machinery must hold a vertical load during air loss or valve centering, install an external rod lock or a pilot-operated check valve to prevent drifting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X1100S FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. The thrust ratings are 10053 N push and 9425 N pull at 0.5 MPa, increasing to 14074 N push and 13194 N pull at 0.7 MPa. The theoretical maximum force is 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops directly into standard large-bore fixtures and supports LB, FA, FB, CA, CB, and TC mountings. Because this SKU includes the -S magnet, you can attach CMSG, DMSG, or EMSG switches for precise end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X1100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.