Airtac SGC Standard Cylinder SGC160X175S
The AirTAC Airtac SGC Standard Cylinder SGC160X175S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 175mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke175 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X175S
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 air port and M36x2.0 rod thread ensure robust connections for high-flow pneumatic demands.
Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The standard TPU seals operate from -20 to +70 C, with Viton H available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X175S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X175S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X175S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X175S Is Used
Press Ejection
Provides the 10053 N push force needed to eject heavy stamped metal parts from a 200-ton hydraulic press bed.
Pallet Diversion
Uses the built-in magnet and 175 mm stroke to trigger DMSG sensors for precise pallet lane diversion on high-throughput packaging lines.
Lift Gate Actuation
Lifts approximately 512 kg of loaded tooling vertically with a 2:1 margin, ideal for raising heavy fixtures on automated assembly platforms.
Is the Airtac SGC Standard Cylinder SGC160X175S the Right Cylinder?
When sizing this 160 mm bore, compare it against the smaller SGC125 (6136 N push @0.5 MPa) or the larger SGC200 (15708 N push @0.5 MPa) to match your exact load. Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centered; the adjustable 50 mm air cushions only decelerate the piston near stroke ends, so add an external rod lock or pilot-operated check valve if you need to hold a suspended load vertically. The 175 mm stroke is well within standard limits, keeping side-load risks low, but always guide the rod end to prevent bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X175S FAQ
The SGC160X175S features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
Yes, the tie-rod construction is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops directly into standard large-bore fixtures. Because this model has the -S magnet, you can mount CMSG, DMSG, or EMSG switches directly into the barrel slot for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.