Airtac SGC Standard Cylinder SGC160X200S
The AirTAC Airtac SGC Standard Cylinder SGC160X200S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X200S
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir to ensure long component life. The G3/4 port and M36x2.0 rod thread handle the high air volumes required for the 160 mm bore.
Because the code includes an -S suffix, this unit has a built-in piston magnet ready for CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of actual work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The default TPU seals handle -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X200S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X200S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X200S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X200S Is Used
Press Die Ejection
Provides the robust 10053 N push force needed to eject heavy formed parts from large stamping presses, utilizing the 200 mm stroke for full clearance.
Pallet Stopper Gate
Acts as a high-force stop gate in heavy palletizing lines, using the -S magnet to confirm gate position for the safety controller.
Material Drop Forming
Drives heavy platens downward in automated forming machines, where the tie-rod construction maintains stability under 14074 N loads at 0.7 MPa.
Is the Airtac SGC Standard Cylinder SGC160X200S the Right Cylinder?
When sizing this 160 mm bore actuator, compare it against its neighbours: the 125 mm bore yields 6136 N push at 0.5 MPa, while the 200 mm bore provides 15708 N. If air pressure drops or the valve is centred, a standard cylinder cannot hold a suspended load—the piston will drift, as the adjustable air cushion only decelerates the stroke near the end. For vertical applications, install an external rod lock or a pilot-operated check valve. At a 200 mm stroke, side-load risks are moderate, but ensure your mounting—whether LB foot, FA flange, or TC trunnion—aligns the rod precisely to prevent guide wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X200S FAQ
The 160 mm bore provides a push force of 10053 N and a pull force of 9425 N at 0.5 MPa. At 0.7 MPa, push is 14074 N and pull is 13194 N. The theoretical maximum force is 2050 kgf at 1.0 MPa. It uses a G3/4 air port and an M36x2.0 piston rod thread.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops directly into existing large-bore ISO 15552 fixtures and accessory kits. The robust tie-rod build handles high thrust, and the included -S magnet supports CMSG, DMSG, or EMSG sensors for end-position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.