Airtac SGC Standard Cylinder SGC160X300H
The AirTAC Airtac SGC Standard Cylinder SGC160X300H is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke300 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X300H
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore actuator features a robust four steel tie-rod design that clamps the aluminum barrel to the covers for extreme structural rigidity. The SGC160X300H variant utilizes a Viton H seal, extending the operating temperature range from 0 to 150 C for harsh industrial environments. A two-way piston seal maintains an internal oil reservoir to maximize component lifespan.
Because it is built to the standardized ISO 15552 mounting interface, this cylinder drops directly into existing large-bore fixtures without requiring custom brackets. The 300 mm stroke operates at speeds of 30-500 mm/s through a G3/4 air port. Plan for roughly 6032 N of real work at 0.5 MPa, which safely lifts about 512 kg vertically with a 2:1 margin.
Airtac SGC Standard Cylinder SGC160X300H Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X300H |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X300H
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X300H Is Used
Automotive Press Loading
Pushes heavy stamped metal panels into hydraulic presses using 10053 N of force while withstanding ambient heat from nearby ovens.
Hot Molding Ejection
Ejects cured composite parts from heated molds, leveraging the Viton H seal to survive continuous 150 C ambient temperatures.
Pallet Dispenser
Separates and feeds empty pallets onto a conveyor line, easily handling the 300 mm stroke requirement with rigid tie-rod support.
Is the Airtac SGC Standard Cylinder SGC160X300H the Right Cylinder?
When sizing this 160 mm bore, verify your actual load against the 10053 N push rating at 0.5 MPa. If your application requires less force, stepping down to the 125 mm bore provides 6136 N, while moving up to the 200 mm bore yields 15708 N. For the 300 mm stroke, ensure external guide rails are used to prevent rod bending under heavy side loads.
Note that this SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG position switches without upgrading to the -S variant. Furthermore, the adjustable air cushion only decelerates the piston near the stroke ends; it will not hold a load vertically if air pressure drops. Install an external rod lock or pilot-operated check valve for secure position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X300H FAQ
This 160 mm bore cylinder features a G3/4 air port and a M36x2.0 rod thread. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot host CMSG, DMSG, or EMSG switches. You must select the -S variant to enable magnetic sensing. The four steel tie rods provide rigid mounting per the ISO 15552 interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X300H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.