Airtac SGC Standard Cylinder SGC160X300S
The AirTAC Airtac SGC Standard Cylinder SGC160X300S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke300 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X300S
Delivering 10053 N of push force at 0.5 MPa, this 160 mm bore tie-rod actuator handles heavy-duty automation with ease. The four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 6032 N of real work at 0.5 MPa, which translates to lifting roughly 512 kg vertically with a 2:1 safety margin.
As a genuine ISO 15552 standard cylinder, it drops seamlessly into existing large-bore fixtures via standardized mounting interface dimensions. The -S suffix indicates a built-in piston magnet for position sensing using CMSG, DMSG, or EMSG switches. It features a G3/4 air port, an M36x2.0 rod thread, and a 50 mm adjustable air cushion at both ends to decelerate the payload smoothly.
Airtac SGC Standard Cylinder SGC160X300S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X300S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X300S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X300S Is Used
Press Die Ejection
Ejects heavy stamped metal parts from press dies using 10053 N of thrust at 0.5 MPa, relying on the 50 mm cushions to absorb impact.
Pallet Stopper Gate
Acts as a robust pneumatic stop gate on heavy-duty pallet conveyors, holding back loads up to 512 kg with a 2:1 vertical lift margin.
Injection Mold Clamping
Provides auxiliary clamping force on large injection molding fixtures, utilizing the rigid four-tie-rod construction to resist deflection.
Is the Airtac SGC Standard Cylinder SGC160X300S the Right Cylinder?
When sizing this 300 mm stroke model, verify if the 10053 N push at 0.5 MPa fits your requirement or if you need to step down to the 125 mm bore (6136 N) or up to the 200 mm bore (15708 N). Because this plain double-acting cylinder drifts when air is lost or the valve is centered, add an external rod lock or pilot-operated check valve if your application requires strict load holding. The end-of-stroke cushions decelerate the piston but do not act as a brake.
With a 300 mm stroke, ensure adequate guide support to prevent rod bending and side-loading damage. The included -S magnet allows seamless integration with CMSG, DMSG, or EMSG sensors for end-position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X300S FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard large-bore accessories like FA flanges or TC trunnions. The -S suffix means it has a built-in magnet ready for CMSG, DMSG, or EMSG electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.