Airtac SGC Standard Cylinder SGC160X450H
The AirTAC Airtac SGC Standard Cylinder SGC160X450H is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 450mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke450 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X450H
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder is built for heavy-duty automation. The Viton H seal option equips this specific unit for extreme thermal demands, extending the operating range up to 150 C. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle substantial thrust without flexing. A two-way piston seal maintains an internal oil reservoir to ensure long-term lubrication and seal life.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of actual work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The G3/4 air port and M36x2.0 rod thread ensure high flow and robust mechanical attachment for demanding industrial cycles.
Airtac SGC Standard Cylinder SGC160X450H Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X450H |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X450H
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X450H Is Used
Injection Mold Clamping
Applies high clamping thrust on heavy polymer injection molds, utilizing the Viton H seal to withstand ambient heat radiating from the heated platens.
Pallet Dispenser Pusher
Indexes empty or loaded pallets along a conveyor line, where the 450 mm stroke provides the exact reach needed to clear downstream machinery.
Heavy Press Ejection
Ejects dense forged or stamped metal parts from a press bed, relying on the rigid tie-rod construction to absorb sudden impact loads without deflection.
Is the Airtac SGC Standard Cylinder SGC160X450H the Right Cylinder?
When sizing this 160 mm bore actuator, compare it against its neighbors: the smaller Ø125 generates 6136 N push, while the larger Ø200 provides 15708 N at 0.5 MPa. This SGC160X450H is ideal when your required force sits comfortably between those two ratings. Since the stroke is 450 mm, carefully manage side loads to prevent rod bending; use guide rails or external load supports to maintain alignment. This non-magnetic version cannot host sensors, so if your sequence requires end-of-stroke detection, select the -S variant instead. Remember that the adjustable 50 mm air cushions only decelerate the piston near the end caps; they do not function as a brake. To prevent drifting when air is lost or a valve is centered, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X450H FAQ
This 160 mm bore cylinder features a G3/4 air port and delivers 10053 N push / 9425 N pull at 0.5 MPa, and 14074 N push / 13194 N pull at 0.7 MPa. The theoretical maximum force is 2050 kgf at 1.0 MPa.
Yes, the H seal option uses Viton FKM to handle temperatures up to 150 C. However, because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG switches; you must select an -S model for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X450H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.