Airtac SGC Standard Cylinder SGC160X450N
The AirTAC Airtac SGC Standard Cylinder SGC160X450N is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 450mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke450 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X450N
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. The Ø160 mm bore uses a G3/4 air port and a 50 mm adjustable air cushion at both ends to absorb kinetic energy. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Equipped from the factory with NBR seals, this unit is optimized for standard industrial temperatures rather than the high-temperature Viton range.
Because the piston generates substantial thrust, plan for about 6032 N of real work at 0.5 MPa to maintain a safe margin. This equates to lifting roughly 512 kg vertically with a 2:1 safety factor, giving you a concrete benchmark for matching part weights. Since this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches; add the -S variant if your control system requires magnetic sensing.
Airtac SGC Standard Cylinder SGC160X450N Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X450N |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X450N
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X450N Is Used
Press Fit Assembly
Drives bearings into heavy machinery housings, utilizing the 10053 N push force at 0.5 MPa to seat components reliably.
Pallet Stopper Gate
Acts as a robust 450 mm stroke blocking barrier on high-throughput conveyor lines, halting loaded pallets weighing up to 500 kg.
Injection Mold Clamp
Secures intermediate mold plates in plastics manufacturing, using the NBR seals and tie-rod rigidity for repeated cycling.
Is the Airtac SGC Standard Cylinder SGC160X450N the Right Cylinder?
This 160 mm bore sits between the SGC125 (which provides 6136 N push at 0.5 MPa) and the SGC200 (which outputs 15708 N). If your load demands less force, the 125 mm bore saves space, while the 200 mm bore is necessary if you need to push beyond 14000 N at 0.7 MPa. With a 450 mm stroke, mount the cylinder carefully to prevent rod bending under side loads; external guide rails are recommended to absorb any lateral forces and prevent premature seal wear.
Note that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered. The end-of-stroke cushions only decelerate the piston and do not function as a locking brake. To suspend a load safely mid-stroke, integrate an external pilot-operated check valve or a dedicated pneumatic rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X450N FAQ
The Ø160 mm bore features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, increasing to 14074 N push and 13194 N pull at 0.7 MPa. The theoretical maximum force is 2050 kgf at 1.0 MPa.
This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. Dimensionally, it uses the standard ISO 15552 mounting interface, allowing it to drop directly into existing large-bore ISO 15552 fixtures and accessory kits without modifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X450N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.