Airtac SGC Standard Cylinder SGC160X500
The AirTAC Airtac SGC Standard Cylinder SGC160X500 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 500mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke500 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X500
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore actuator handles heavy industrial tasks. It features a rigid tie-rod build where four steel rods clamp the aluminum barrel to the covers, and the two-way piston seal maintains an oil reservoir for extended lifespan. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures.
Equipped with a G3/4 port and an M36x2.0 rod thread, the unit operates at speeds of 30-500 mm/s. Plan for about 6032 N of real work at 0.5 MPa, which means it lifts roughly 512 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac SGC Standard Cylinder SGC160X500 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X500 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X500
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X500 Is Used
Press Ejection
Provides the robust 10053 N push at 0.5 MPa needed to eject formed metal parts from heavy stamping presses.
Pallet Handling
Utilizes its 500 mm stroke to push heavy loaded pallets smoothly onto transfer rollers in automated distribution centers.
Mold Clamping
Clamps large injection molds securely in place, relying on the rigid four-rod construction to resist high operational forces.
Is the Airtac SGC Standard Cylinder SGC160X500 the Right Cylinder?
When sizing this 160 mm bore actuator, compare it against its neighbors: the smaller 125 mm bore yields 6136 N push at 0.5 MPa, while the larger 200 mm bore provides 15708 N. If your fixture requires position feedback, you must select the -S magnet variant, as this base model cannot host a sensor. Furthermore, a plain cylinder drifts when air is lost or the valve is centered; the 50 mm adjustable air cushion only decelerates the piston near stroke end. To hold a load securely, install an external rod lock or a pilot-operated check valve.
Because the 500 mm stroke is substantial for a large-bore actuator, carefully manage side loads. Always use an external guide or rod-end support to prevent rod bending during extension.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X500 FAQ
This 160 mm bore cylinder features a G3/4 port and an M36x2.0 rod thread. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, meaning it cannot host CMSG, DMSG, or EMSG switches. You must select the -S variant for sensing capabilities. It is also dimensionally interchangeable per the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.