Airtac SGC Standard Cylinder SGC160X650
The AirTAC Airtac SGC Standard Cylinder SGC160X650 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X650
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with a 650 mm stroke. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir to maximize service life. The G3/4 port and M36x2.0 rod thread accommodate the high airflow needed for rapid cycling.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 6032 N of usable work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The standard TPU seals operate from -20 to +70 C, though a Viton H option extends this to 150 C for hot environments.
Airtac SGC Standard Cylinder SGC160X650 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X650 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X650
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X650 Is Used
Pallet Transfer Diversion
Pushes heavy loaded pallets sideways onto secondary packaging lines using its 650 mm stroke and 10053 N push force at 0.5 MPa.
Automated Warehousing Pusher
Acts as a robust diverter in high-throughput logistics hubs, relying on the rigid tie-rod construction to withstand repetitive impact loads.
Press Ejection System
Ejects formed metal components from heavy stamping presses, utilizing the adjustable 50 mm air cushions to decelerate the rod smoothly at stroke end.
Is the Airtac SGC Standard Cylinder SGC160X650 the Right Cylinder?
When sizing this 160 mm bore, verify if the 10053 N push at 0.5 MPa is sufficient or if you should step up to the 200 mm bore (15708 N push). Conversely, the smaller 125 mm bore offers 6136 N if footprint constraints demand a lighter frame. Since this is a 650 mm stroke, external guide rails are strongly recommended to prevent rod bending and absorb side loads during long extensions. Additionally, a plain cylinder drifts when air is lost or the valve is centered—the end cushions only decelerate the piston, so add an external rod lock or pilot-operated check valve if the load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X650 FAQ
The SGC160X650 delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa. It uses a G3/4 air port and a 40 mm diameter piston rod with an M36x2.0 thread.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant (SGC160X650-S) if you require magnetic position sensing. The cylinder is dimensionally interchangeable per the ISO 15552 mounting interface for easy fixture integration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X650
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.