Airtac SGC Standard Cylinder SGC200X1000H
The AirTAC Airtac SGC Standard Cylinder SGC200X1000H is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X1000H
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder tackles heavy-duty cycles with a 1000 mm stroke. The SGC200X1000H relies on a robust tie-rod design where four steel rods clamp the aluminium barrel to the covers, ensuring high structural rigidity under extreme thrust. Because it carries the H seal designation, it uses Viton FKM elastomers that extend the operating temperature range up to 150 C for harsh industrial environments.
The standardized ISO 15552 mounting interface allows seamless integration into existing large-bore fixtures. It features a G3/4 air port, an M36x2.0 rod thread, and a two-way piston seal that maintains an internal oil reservoir for prolonged lubrication. Plan for approximately 9425 N of real work at 0.5 MPa, which translates to lifting roughly 801 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the S magnet option and therefore cannot support CMSG, DMSG, or EMSG magnetic switches.
Airtac SGC Standard Cylinder SGC200X1000H Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X1000H |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X1000H
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X1000H Is Used
Automotive Press Ejection
Ejects heavy formed panels from hydraulic presses, utilizing the 21991 N push force at 0.7 MPa and Viton H seals to withstand ambient heat radiating from the machinery.
Palletizer Clamp Rotation
Drives the extended 1000 mm rotation arm on high-speed palletizing cells, moving heavy unit loads while relying on external guides to counteract bending moments.
Foundry Mold Handling
Positions heavy resin-bonded sand molds along the assembly line, where the 150 C high-temperature seal option survives proximity to hot curing ovens.
Is the Airtac SGC Standard Cylinder SGC200X1000H the Right Cylinder?
When sizing this 200 mm bore actuator, consider the adjacent options in the SGC range: the 160 mm bore provides 10053 N of push at 0.5 MPa, while the larger 250 mm bore offers 24543 N. This 1000 mm stroke variant requires careful attention to side-load risks; to prevent rod bending over such a long extension, implement external guide rails to support the load. Furthermore, a standard double-acting cylinder will drift if air pressure is lost or the valve is centred, as the adjustable air cushion only decelerates the piston near stroke end rather than locking it. To suspend a load safely during an outage, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X1000H FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. The thrust output is 15708 N push and 15079 N pull at 0.5 MPa, increasing to 21991 N push and 21110 N pull at 0.7 MPa. The theoretical maximum force is 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, meaning it cannot accommodate CMSG, DMSG, or EMSG reed switches. You would need to specify the -S variant for magnetic sensing, or use external mechanical limit switches. The unit is dimensionally interchangeable per the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X1000H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.