Airtac SGC Standard Cylinder SGC200X1100S
The AirTAC Airtac SGC Standard Cylinder SGC200X1100S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X1100S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder tackles heavy automation tasks with ease. The Ø200 mm bore uses a G3/4 air port and a robust M36x2.0 piston rod. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed for such large thrusts, while the two-way piston seal maintains an internal oil reservoir for long service life.
Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures. The built-in magnet (indicated by the -S suffix) supports CMSG, DMSG, and EMSG position switches. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. Standard TPU seals handle temperatures from -20 to +70 C, with Viton H available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X1100S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X1100S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X1100S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X1100S Is Used
Automotive Stamping Transfer
Pushes heavy press dies or chassis panels along an assembly line, utilizing the 15708 N force to move loads smoothly over the 1100 mm travel distance.
Palletizer Push-Off
Acts as the main sweep arm in a palletizing cell, using its 9425 N safe working capacity to index packaged goods onto a waiting pallet.
Large Press Ejection
Ejects formed metal parts from heavy industrial presses, relying on the rigid tie-rod construction to withstand high impact forces without flexing.
Is the Airtac SGC Standard Cylinder SGC200X1100S the Right Cylinder?
When sizing this 200 mm bore model, compare it against its neighbors: a 160 mm bore yields 10053 N of push at 0.5 MPa, while stepping up to the 250 mm bore provides 24543 N. This SGC200X1100S variant includes the -S magnet for electronic or reed sensors. Because the 1100 mm stroke is quite long, external guides are strongly recommended to prevent rod bending and manage side loads during extension.
Note that a standard double-acting cylinder drifts when air is lost or the valve is centered; the adjustable 50 mm air cushions only decelerate the piston near the end of stroke and do not act as a brake. To hold a load safely in place, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X1100S FAQ
This Ø200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard large-bore fixtures and mounts like FA flanges or TC trunnions. The -S suffix means it has a built-in magnet ready for CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X1100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.