Airtac SGC Standard Cylinder SGC200X170TC
The AirTAC Airtac SGC Standard Cylinder SGC200X170TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 170mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke170 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X170TC
Delivering 15708 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers, providing the high rigidity needed to handle large-bore thrust without flexing. The two-way piston seal retains an oil reservoir for continuous lubrication and long service life. Plan for about 9425 N of real work at 0.5 MPa, which means it can safely lift roughly 801 kg vertically with a 2:1 margin.
This 200 mm bore model uses a G3/4 air port and a Ø40 mm hard-chrome piston rod with an M36x2.0 thread. Because this specific SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG magnetic switches for position sensing. The standard TPU seals operate from -20 to +70 C, while a Viton H option extends the thermal limit to 150 C for high-temperature environments.
Airtac SGC Standard Cylinder SGC200X170TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X170TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X170TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X170TC Is Used
Automotive Press Stamping
Provides the 21991 N push force at 0.7 MPa required to actuate heavy forming presses and clamp large body panels securely during stamping operations.
Palletizer Load Rotation
Uses the TC trunnion mount to pivot heavy palletizing arms, leveraging the 15079 N pull force at 0.5 MPa to orient inbound freight loads efficiently.
Injection Mold Extraction
Drives robust extraction arms on large injection molding machines, where the rigid tie-rod construction withstands repetitive high-impact extraction cycles.
Is the Airtac SGC Standard Cylinder SGC200X170TC the Right Cylinder?
When sizing this actuator, compare its 15708 N push force at 0.5 MPa against the adjacent bores: the 160 mm bore provides 10053 N, and the 250 mm bore offers 24543 N. The integrated TC trunnion mount suits pivoting mechanisms, but ensure your structure supports side loads, especially at the 170 mm stroke length. For longer strokes approaching 500 mm or more, add external guide rails to prevent rod bending and premature seal wear.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered. The adjustable 50 mm air cushions at both ends only decelerate the piston near the stroke limits; they do not act as a brake. To suspend a load safely mid-stroke, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X170TC FAQ
The 200 mm bore generates a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, push is 21991 N and pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. This model features a G3/4 air port and a 50 mm adjustable air cushion at both ends.
No, this specific SKU does not include a magnet (-S option) and therefore cannot support CMSG, DMSG, or EMSG magnetic switches. For position feedback, you would need the -S variant or external mechanical sensors. It is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X170TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.