Airtac SGC Standard Cylinder SGC200X180
The AirTAC Airtac SGC Standard Cylinder SGC200X180 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 180mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke180 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X180
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore actuator is built for heavy-duty automation. The Ø200 mm barrel is clamped between the front and rear covers by four steel tie rods, ensuring high structural rigidity under extreme thrust loads. A heterogeneous two-way piston seal retains an internal oil reservoir to maximize operational lifespan. Air enters via a G3/4 port, driving the Ø40 mm hard-chrome rod at speeds of 30-500 mm/s.
Because it conforms to the ISO 15552 mounting interface, this cylinder drops directly into existing large-bore fixtures without custom bracketry. For practical sizing, plan for roughly 9425 N of real work at 0.5 MPa, which equates to lifting about 801 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG position sensors.
Airtac SGC Standard Cylinder SGC200X180 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X180 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X180
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X180 Is Used
Automotive Stamping Press
Provides the 15708 N push force required to actuate heavy lower dies and secure stamping blanks in high-tonnage press lines.
Palletizer Clamp Arm
Drives robust mechanical clamp arms to secure unstable pallet loads during transit, utilizing the 180 mm stroke for rapid gripping.
Injection Mould Ejection
Ejects dense plastic automotive bumpers from large injection moulding machines, relying on the four tie rods for rigid, deflection-free ejection.
Is the Airtac SGC Standard Cylinder SGC200X180 the Right Cylinder?
When sizing this 200 mm bore option, compare it against its neighbours: the Ø160 bore yields 10053 N of push at 0.5 MPa, while the massive Ø250 bore provides 24543 N. Choose this Ø200 model for applications needing roughly 15708 N of thrust. Keep in mind that a standard double-acting cylinder drifts if air pressure is lost or the valve is centred; the adjustable 50 mm air cushions only decelerate the piston near stroke ends and do not function as a locking brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve.
This 180 mm stroke falls safely below the 500 mm threshold, minimizing rod-bending risks, but always verify side-load alignment. To add magnetic sensing for end-of-stroke confirmation, you must select the -S variant instead of this base model. Mounting options include LB foot, FA/FB flange, CA/CB clevis, and TC trunnion styles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X180 FAQ
The SGC200X180 delivers a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, push is 21991 N and pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. It uses a G3/4 air port and features a Ø40 mm piston rod with an M36x2.0 thread.
No, this specific SKU does not include a magnet. To use CMSG, DMSG, or EMSG magnetic switches, you must purchase the -S variant of this cylinder. Additionally, its ISO 15552 mounting interface ensures dimensional interchangeability with standard large-bore fixtures, and the tie-rod build provides high rigidity for heavy loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.