Airtac SGC Standard Cylinder SGC200X180STC
The AirTAC Airtac SGC Standard Cylinder SGC200X180STC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 180mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke180 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X180STC
Delivering 15708 N of push force at 0.5 MPa, this double-acting AirTAC SGC200X180STC large-bore cylinder handles heavy automation tasks with ease. The Ø200 mm bore uses a G3/4 port and an M36x2.0 piston rod. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work at 0.5 MPa, which lifts roughly 801 kg vertically with a 2:1 safety margin.
Because it features a built-in piston magnet (-S), this specific SKU supports CMSG, DMSG, and EMSG reed or electronic switches for precise end-position detection. The standardized ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures. It includes a TC trunnion mount and adjustable air cushions at both ends to decelerate the piston smoothly near stroke limits.
Airtac SGC Standard Cylinder SGC200X180STC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X180STC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X180STC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X180STC Is Used
Automotive Press Stamping
Drives heavy stamping dies and clamping fixtures where the 15708 N push force securely holds metal panels during forming operations.
Pallet Dispenser Actuation
Lifts and indexes empty wooden pallets in high-throughput packaging lines, utilizing the TC trunnion mount for pivoting articulation.
Heavy Machinery Gate Control
Opens and closes large safety gates or material hoppers, relying on the robust tie-rod construction to withstand continuous 180 mm strokes.
Is the Airtac SGC Standard Cylinder SGC200X180STC the Right Cylinder?
When sizing this 200 mm bore actuator, compare its 15708 N push force at 0.5 MPa against the adjacent SGC options: the smaller Ø160 bore yields 10053 N, while the larger Ø250 provides 24543 N. The included TC trunnion mount accommodates pivoting loads, but remember that a standard double-acting cylinder drifts if air pressure is lost or the valve is centred. The end-of-stroke air cushions only decelerate the piston; they do not function as a lock or brake. To safely hold a vertical load, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X180STC FAQ
This Ø200 mm bore model features a G3/4 air port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. Its ISO 15552 mounting interface means it is dimensionally interchangeable with other standard large-bore cylinders and accepts standard TC trunnion accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X180STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.