Airtac SGC Standard Cylinder SGC200X2000S
The AirTAC Airtac SGC Standard Cylinder SGC200X2000S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 2000mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke2000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X2000S
Delivering 15708 N of push force at 0.5 MPa, this large-bore actuator is built for heavy-duty automation. It features a robust tie-rod design where four steel rods clamp the aluminum barrel to the covers, ensuring high rigidity under high thrust. The two-way piston seal maintains an internal oil reservoir for long operational life. Because this variant includes a piston magnet (-S), it directly supports CMSG, DMSG, and EMSG position switches.
This 200 mm bore unit has a 2000 mm stroke, which exceeds the 1500 mm standard maximum and is supplied as a made-to-order item. It uses a G3/4 air port and an M36x2.0 piston rod thread. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. The standard TPU seal handles temperatures from -20 to +70 C, while a Viton H option extends this to 0-150 C.
Airtac SGC Standard Cylinder SGC200X2000S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X2000S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X2000S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X2000S Is Used
Automotive Skid Transfer
Pushes heavy manufacturing skids along assembly line conveyors over a 2000 mm reach using 15708 N of 0.5 MPa thrust.
Palletizer Divert Arm
Actuates a long diverting arm in end-of-line packaging zones, utilizing the built-in magnet for DMSG sensor feedback.
Large Press Ejection
Ejects formed metal parts from heavy industrial presses, relying on the rigid four-tie-rod build to absorb shock.
Is the Airtac SGC Standard Cylinder SGC200X2000S the Right Cylinder?
When sizing this 200 mm bore actuator, consider the neighboring bores: the 160 mm option yields 10053 N push at 0.5 MPa, while the 250 mm version provides 24543 N. Because this is a non-standard 2000 mm stroke, external guide support is critical to prevent rod bending and manage side loads during the extended travel. The ISO 15552 mounting interface ensures dimensional interchangeability with standard large-bore fixtures and accessories. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it does not function as a brake. To hold a load securely on air loss or when a valve is centered, you must add an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X2000S FAQ
This 200 mm bore cylinder uses a G3/4 air port. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops into standard large-bore fixtures. The included -S magnet enables CMSG, DMSG, and EMSG switches, and the rigid tie-rod construction handles high thrust.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X2000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.