Airtac SGC Standard Cylinder SGC200X200SH
The AirTAC Airtac SGC Standard Cylinder SGC200X200SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X200SH
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface for seamless fixture integration. Four steel tie rods clamp the aluminium barrel to the covers, providing the high rigidity needed to handle heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life.
Equipped with the -S magnet, the unit supports CMSG, DMSG, and EMSG position switches. The -H Viton seal extends the operating temperature range up to 150 C. Plan for about 9425 N of real work at 0.5 MPa, which translates to lifting roughly 801 kg vertically with a 2:1 safety margin. The air port is G3/4, and the rod end features an M36x2.0 thread.
Airtac SGC Standard Cylinder SGC200X200SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X200SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X200SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X200SH Is Used
Automotive Press Stamping
Drives heavy stamping dies and forming fixtures where the 21991 N push force at 0.7 MPa easily secures large metal panels.
Palletiser Stop Gate
Acts as a robust stopper for loaded pallets on high-throughput packaging lines, safely halting masses approaching its 801 kg vertical lift equivalent.
Injection Mould Extraction
Ejects bulky moulded plastic components from hot environments, utilising the Viton H seal to withstand ambient temperatures up to 150 C.
Is the Airtac SGC Standard Cylinder SGC200X200SH the Right Cylinder?
When sizing this 200 mm bore actuator, compare it against its neighbours: the 160 mm bore yields 10053 N of push at 0.5 MPa, while the 250 mm bore provides 24543 N. This 200 mm option hits a strong middle ground with 21991 N at 0.7 MPa. Because the standard SGC design lacks a holding mechanism, the piston will drift if air pressure drops or the valve centres; the 50 mm adjustable air cushion only decelerates the stroke near the end points. For suspended loads, install an external rod lock or a pilot-operated check valve. At a 200 mm stroke, side-load risks are moderate, but ensuring proper guide alignment is still recommended.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X200SH FAQ
This 200 mm bore cylinder delivers 15708 N push and 15079 N pull at 0.5 MPa, increasing to 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa. It features a G3/4 air port, a 40 mm piston rod with an M36x2.0 thread, and operates at speeds of 30-500 mm/s.
Yes, the tie-rod construction is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures. The included -S magnet enables direct mounting of CMSG, DMSG, or EMSG electronic and reed switches along the barrel for stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.