Airtac SGC Standard Cylinder SGC200X210S
The AirTAC Airtac SGC Standard Cylinder SGC200X210S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 210mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke210 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X210S
Generating 15708 N of push force at 0.5 MPa, this large-bore actuator handles heavy industrial loads with ease. The SGC200X210S is a double-acting tie-rod cylinder built to the ISO 15552 mounting interface, meaning it drops directly into existing large-bore fixtures without custom brackets. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life.
Because the code includes the -S suffix, this unit has a built-in piston magnet ready for CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The G3/4 air port and M36x2.0 rod thread supply the high flow and strong mechanical connection required for a 200 mm bore.
Airtac SGC Standard Cylinder SGC200X210S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X210S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X210S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X210S Is Used
Press Die Ejection
Provides the robust 15708 N push at 0.5 MPa needed to eject heavy stamped metal panels from large press dies.
Pallet Stopper Gate
Acts as a high-force stopper gate on heavy-duty pallet conveyors, using its 210 mm stroke to block and release loaded units.
Injection Mold Clamping
Delivers reliable clamping pressure for large plastic injection molding segments, utilizing the rigid four-tie-rod build.
Is the Airtac SGC Standard Cylinder SGC200X210S the Right Cylinder?
When sizing this 200 mm bore option, compare its 15708 N push force at 0.5 MPa against the smaller 160 mm bore (10053 N) or the larger 250 mm bore (24543 N) to match your exact load. The 210 mm stroke sits well within the 1500 mm maximum, keeping the assembly compact. Remember that a standard double-acting cylinder drifts when air is removed or a valve is centered; the adjustable 50 mm air cushions only decelerate the piston near stroke ends rather than locking the load. For suspended loads, add an external rod lock or pilot-operated check valve. This SKU includes the -S magnet for electronic or reed sensors, whereas a plain SKU without S cannot accept them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X210S FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it accepts standard LB foot, FA flange, or TC trunnion accessories. The -S suffix denotes a built-in magnet for CMSG, DMSG, or EMSG switches; a model without S cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.