Airtac SGC Standard Cylinder SGC200X225
The AirTAC Airtac SGC Standard Cylinder SGC200X225 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 225mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke225 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X225
Delivering 15708 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder handles heavy automation tasks with ease. The SGC200X225 features a 200 mm bore, a 225 mm stroke, and a G3/4 air port. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed for large-bore thrust, while a two-way piston seal maintains an internal oil reservoir for long service life.
Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. This SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches. The default TPU seal handles -20 to +70 C, with a Viton H option for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X225 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X225 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X225
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X225 Is Used
Heavy Stamping Presses
Generates 21991 N of push force at 0.7 MPa to drive heavy stamping and forming dies in automotive parts manufacturing.
Pallet Handling Stops
Acts as a robust stopper arm in high-throughput distribution centers, absorbing the impact of fully loaded pallets.
Plastic Injection Molding
Provides the high clamping force required to hold large injection mold halves together securely during high-pressure resin injection.
Is the Airtac SGC Standard Cylinder SGC200X225 the Right Cylinder?
When sizing this 200 mm bore model, compare it against its neighbors: the 160 mm bore yields 10053 N of push at 0.5 MPa, while the 250 mm bore provides 24543 N. Choose the 200 mm bore when your application requires substantial force, such as the 21991 N available at 0.7 MPa, but you want to avoid the larger footprint and air consumption of the 250 mm version. The M36x2.0 rod thread and 50 mm adjustable air cushions at both ends help manage impact at stroke ends.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered; the air cushions only decelerate the piston near the end of travel and do not act as a brake. For suspended or vertical loads that must be held in place during an air failure, install an external rod lock or a pilot-operated check valve. Since this specific SKU has no -S magnet, you must use external mechanical limit switches for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X225 FAQ
The SGC200X225 has a 200 mm bore and a G3/4 air port. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, and a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for magnetic sensing, or you can use external mechanical switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.