Airtac SGC Standard Cylinder SGC200X350
The AirTAC Airtac SGC Standard Cylinder SGC200X350 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X350
Generating 15708 N of push force at 0.5 MPa, this large-bore actuator handles heavy industrial pressing and lifting. The Ø200 mm bore uses a G3/4 air port and an M36x2.0 piston rod. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without redesigning your machine plate.
Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity under high thrust. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which lifts roughly 801 kg vertically with a 2:1 safety margin. This base SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG position switches without upgrading to the -S variant.
Airtac SGC Standard Cylinder SGC200X350 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X350 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X350
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X350 Is Used
Automotive Stamping Press
Provides the heavy 15708 N push force required to form and seat heavy-gauge steel body panels in automated stamping lines.
Pallet Dispenser Gate
Actuates the heavy diverter gate on high-throughput packaging conveyors, moving loaded pallets with reliable 350 mm travel.
Injection Mold Clamping
Secures large mold halves in heavy plastic injection machinery, utilizing the rigid four-tie-rod build to resist spreading forces.
Is the Airtac SGC Standard Cylinder SGC200X350 the Right Cylinder?
If 15708 N at 0.5 MPa is too much power, step down to the Ø160 bore which yields 10053 N; if you need more force, the Ø250 bore provides 24543 N. This 350 mm stroke unit operates safely within the 30-500 mm/s speed range. Because the stroke is under 500 mm, side-load bending stress is minimal compared to longer units.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered. The adjustable 50 mm air cushions only decelerate the piston near the end caps and do not function as a braking lock. To suspend a load safely, install an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X350 FAQ
At 0.5 MPa it pushes with 15708 N and pulls with 15079 N. At 0.7 MPa the push is 21991 N and the pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. This Ø200 mm bore utilizes a G3/4 air port.
No, this specific SKU does not include a piston magnet, meaning it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant (SGC200X350-S) to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.