Airtac SGC Standard Cylinder SGC200X500
The AirTAC Airtac SGC Standard Cylinder SGC200X500 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 500mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke500 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X500
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore actuator is built around a genuine ISO 15552 mounting interface for direct fixture and accessory interchangeability. Four steel tie rods clamp the aluminium barrel to the front and rear covers, providing the high rigidity needed to handle heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. Plan for roughly 9425 N of real work at 0.5 MPa, which translates to lifting about 801 kg vertically with a 2:1 safety margin.
This specific SKU lacks the -S magnet option, meaning it cannot accept CMSG, DMSG, or EMSG magnetic switches for position sensing. It features a Ø40 mm piston rod with an M36x2.0 thread, a G3/4 air port, and 50 mm adjustable air cushions at both ends to decelerate the payload smoothly. The standard TPU seal handles temperatures from -20 to +70 C, with Viton H available for 0-150 C high-heat environments.
Airtac SGC Standard Cylinder SGC200X500 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X500 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X500
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X500 Is Used
Press Ejection Systems
Generates 21991 N of push force at 0.7 MPa to reliably eject heavy stamped metal parts from large press beds.
Pallet Diverters
Uses the 500 mm stroke to push heavy pallets sideways onto adjacent conveyor lanes in high-throughput distribution hubs.
Automated Gate Actuators
Lifts or shifts heavy industrial security gates, utilizing the robust tie-rod construction to withstand repetitive high-mass cycling.
Is the Airtac SGC Standard Cylinder SGC200X500 the Right Cylinder?
When sizing this 200 mm bore actuator, compare your actual load against the neighbouring bores: the 160 mm bore yields 10053 N push at 0.5 MPa, while the 250 mm bore provides 24543 N. Because this 500 mm stroke is relatively long, you must account for rod-bending and side loads—use an external guide or stopper to prevent excessive lateral stress on the piston rod. Additionally, this plain cylinder will drift if air pressure is lost or the valve is centred; the air cushions only decelerate the piston near the stroke ends and do not act as a brake. For suspended or vertical loads, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X500 FAQ
The SGC200X500 delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, and a theoretical maximum of 3204 kgf at 1.0 MPa. It uses a G3/4 air port and features a 50 mm adjustable air cushion at both ends.
No, this specific SKU does not include the -S magnet, so it cannot support CMSG, DMSG, or EMSG magnetic switches. You would need to order the -S variant for position sensing capabilities.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.