Airtac SGC Standard Cylinder SGC200X50CB
The AirTAC Airtac SGC Standard Cylinder SGC200X50CB is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 50mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke50 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X50CB
Delivering 15708 N of thrust at 0.5 MPa, this double-acting large-bore cylinder brings serious force to automated lines. The Ø200 mm bore uses a G3/4 air port and a Ø40 mm hard-chrome rod. Four steel tie rods clamp the aluminum barrel to the covers, providing the rigidity needed to handle large-bore pressure without flexing. A two-way piston seal maintains an internal oil reservoir to ensure long component life.
Because it follows the ISO 15552 mounting interface, this unit drops directly into existing ISO 15552 fixtures and clevis accessories. Plan for about 9425 N of real work at 0.5 MPa, which means it lifts roughly 801 kg vertically with a 2:1 safety margin. The standard TPU seal handles temperatures from -20 to +70 C, while a Viton H option extends this to 150 C. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac SGC Standard Cylinder SGC200X50CB Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X50CB |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X50CB
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X50CB Is Used
Press Fit Assembly
Drives heavy bearings into automotive transmission housings, utilizing the 15708 N push force at 0.5 MPa to seat components reliably.
Injection Mold Clamping
Secures large resin casting molds via the CB clevis mount, handling high clamping forces with a rigid four tie-rod build.
Pallet Stopper Gate
Acts as a heavy-duty stopper arm on high-mass conveyor lines, absorbing impact using the 50 mm adjustable air cushions at both ends.
Is the Airtac SGC Standard Cylinder SGC200X50CB the Right Cylinder?
When sizing this model against the SGC family, the smaller Ø160 bore yields 10053 N of push at 0.5 MPa, while the larger Ø250 bore provides 24543 N. Choose the Ø200 bore when your application requires moving loads that exceed the capacity of the 160 mm variant but do not warrant the full 34360 N output of the 250 mm version at 0.7 MPa. The integrated CB clevis mount suits pivoting articulations.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the control valve centers; the adjustable 50 mm air cushions only decelerate the piston near the stroke ends and do not act as a brake. To suspend a load safely during an emergency stop, fit an external rod lock or a pilot-operated check valve. Since this SKU has no -S magnet, position sensing is unavailable.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X50CB FAQ
This Ø200 mm bore cylinder features a G3/4 air port and delivers a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, the push force is 21991 N and the pull force is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must select an SGC model with the -S suffix to enable CMSG, DMSG, or EMSG magnetic switches. The unit is dimensionally interchangeable per the ISO 15552 mounting interface, allowing easy integration with standard large-bore clevis and trunnion accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X50CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.