Airtac SGC Standard Cylinder SGC200X50SH
The AirTAC Airtac SGC Standard Cylinder SGC200X50SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 50mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke50 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X50SH
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built for heavy-duty automation. The SGC200X50SH features a genuine ISO 15552 mounting interface, dropping directly into existing large-bore fixtures without redesign. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity under high thrust, while the two-way piston seal maintains an internal oil reservoir for long component life.
Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG electronic or reed switches for position sensing. The -H designation equips it with Viton seals, extending the operating temperature range from -20 to +70 C up to 0-150 C for harsh thermal environments. Plan for about 9425 N of real work at 0.5 MPa, which translates to lifting roughly 801 kg vertically with a 2:1 safety margin. Air enters via the G3/4 port, and adjustable air cushions at both ends absorb end-of-stroke impact.
Airtac SGC Standard Cylinder SGC200X50SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X50SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X50SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X50SH Is Used
Hot Stamp Pressing
Uses the 15708 N push force and Viton high-temp seal to hold parts firmly against heated tooling up to 150 C without seal degradation.
Heavy Duty Clamping
Secures large steel weldments in fabrication fixtures using the short 50 mm stroke, leveraging the rigid tie-rod construction to prevent deflection.
Industrial Forming Die
Provides steady downward pressure for metal bending operations, utilizing the built-in magnet for precise top-dead-center position feedback.
Is the Airtac SGC Standard Cylinder SGC200X50SH the Right Cylinder?
When sizing this 200 mm bore model, consider the neighboring SGC bores to match your exact load: the smaller SGC160 offers 10053 N push at 0.5 MPa, while the larger SGC250 provides 24543 N. If your application requires the piston to stay put after a power or air loss, note that a standard cylinder will drift; you must add an external rod lock or a pilot-operated check valve, as the air cushions only decelerate the stroke and cannot hold a load. The 50 mm stroke is short and highly resistant to rod bending, making it ideal for high-force pressing or clamping without requiring external guide rails. Choose LB foot or FA flange mounts per the ISO 15552 interface to secure the body.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X50SH FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, accepting standard LB, FA, and TC mounts. The included -S magnet allows direct mounting of CMSG, DMSG, or EMSG switches along the barrel for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X50SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.