Airtac SGC Standard Cylinder SGC200X520
The AirTAC Airtac SGC Standard Cylinder SGC200X520 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 520mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke520 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X520
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles heavy industrial loads across its 520 mm travel. It features a robust tie-rod construction where four steel rods clamp the aluminum barrel to the covers, ensuring high rigidity under stress. The two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work at 0.5 MPa, which means it lifts roughly 801 kg vertically with a 2:1 safety margin.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. The design is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop directly into existing large-bore fixtures. It uses a G3/4 air port, an M36x2.0 rod thread, and adjustable air cushions at both ends to decelerate the piston smoothly.
Airtac SGC Standard Cylinder SGC200X520 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X520 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 520 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X520
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×520 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X520 Is Used
Automotive Press Ejection
Provides the high thrust needed to eject stamped metal panels from heavy presses, utilizing the 520 mm stroke to clear the tooling area completely.
Pallet Dispenser Mechanism
Pushes empty pallets into high-speed packaging lines, using the robust tie-rod construction to absorb impact forces without barrel deflection.
Heavy Mold Transfer
Shifts large injection molds along production tracks, relying on the 15708 N push force to move substantial weight smoothly on external guides.
Is the Airtac SGC Standard Cylinder SGC200X520 the Right Cylinder?
When sizing this 200 mm bore unit, verify your actual load requirements. If your application demands less force, the smaller 160 mm bore provides 10053 N of push at 0.5 MPa. If you need more power, stepping up to the 250 mm bore yields 24543 N. This 520 mm stroke length requires external guide support to prevent rod bending and manage side loads during extension. Furthermore, a standard cylinder drifts when air is lost or a valve is centered; the air cushion only decelerates the piston near the end of travel and does not act as a brake. For secure load holding, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X520 FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. The force output is 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must choose the -S variant to use CMSG, DMSG, or EMSG switches. However, all versions share the ISO 15552 mounting interface, ensuring easy fixture compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X520
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.