Airtac SGC Standard Cylinder SGC200X700SH
The AirTAC Airtac SGC Standard Cylinder SGC200X700SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X700SH
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles heavy-duty automation with ease. The SGC200X700SH features a robust tie-rod design where four steel rods clamp the aluminium barrel to the covers, ensuring high rigidity under stress. It includes a 700 mm stroke, a G3/4 air port, and a two-way piston seal that maintains an internal oil reservoir for long service life. Equipped with a piston magnet, it supports CMSG, DMSG, and EMSG switches for position sensing.
Because this specific SKU carries the H seal designation, it uses Viton FKM elastomers rated for 0-150 C high-temperature environments instead of the standard TPU. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The unit is dimensionally interchangeable per the ISO 15552 mounting interface, dropping easily into existing large-bore fixtures.
Airtac SGC Standard Cylinder SGC200X700SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X700SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X700SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X700SH Is Used
Automotive Press Stamping
Drives heavy stamping dies and holding fixtures where the 21991 N push force at 0.7 MPa secures large metal panels during forming processes.
Palletizer Load Pusher
Utilizes the 700 mm stroke to push completed pallet loads onto outbound conveyors, moving masses near the 801 kg vertical lift threshold.
High-Temp Composite Molding
Operates reliably in 0-150 C curing ovens thanks to the Viton H seals, applying steady clamping pressure on composite molds.
Is the Airtac SGC Standard Cylinder SGC200X700SH the Right Cylinder?
When sizing this 200 mm bore actuator, compare it against its neighbours: a 160 mm bore yields 10053 N push at 0.5 MPa, while stepping up to a 250 mm bore provides 24543 N. This model occupies a strong middle ground for high-force tasks. Note that a plain cylinder drifts when air is lost or a valve is centered; the adjustable 50 mm air cushions only decelerate the piston near stroke ends and do not act as a brake. For suspended loads, install an external rod lock or pilot-operated check valve.
With a 700 mm stroke, preventing rod bending and side-load damage is critical. Ensure adequate external guide rails to support the load, as the 40 mm piston rod is subjected to significant leverage over extended distances. The built-in -S magnet allows seamless integration of CMSG, DMSG, or EMSG sensors without additional hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X700SH FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, the H designation indicates Viton FKM seals rated for 0-150 C. However, the cylinder will drift if air pressure is lost, as the air cushions only decelerate the piston at stroke ends rather than locking it. Use an external rod lock for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X700SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.