Airtac SGC Standard Cylinder SGC200X900N
The AirTAC Airtac SGC Standard Cylinder SGC200X900N is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 900mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke900 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X900N
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface for direct fixture interchangeability. The Ø200 mm bore design relies on four steel tie rods clamping the aluminium barrel to the covers, ensuring high rigidity while the two-way piston seal maintains an internal oil reservoir for long mechanical life. Because this SKU uses the NBR seal option, it is rated for a -20 to +70 C operating range, rather than the high-temperature Viton variant. It features a G3/4 port and an M36x2.0 rod thread.
For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. Note that this specific configuration lacks the -S magnet, meaning it cannot host CMSG, DMSG, or EMSG magnetic switches for position sensing.
Airtac SGC Standard Cylinder SGC200X900N Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X900N |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X900N
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X900N Is Used
Automotive Press Ejection
Ejects heavy stamped metal panels from large press beds, using the 900 mm stroke to fully clear the die area before the next sheet loads.
Palletizer Push-Off
Pushes completed unit loads onto outbound roller conveyors in high-throughput distribution centers, relying on the 15708 N thrust to shift heavy palletized goods smoothly.
Heavy Door Actuation
Opens and closes large industrial blast doors or machinery access panels, utilizing the NBR seals for standard ambient factory environments.
Is the Airtac SGC Standard Cylinder SGC200X900N the Right Cylinder?
When sizing this 900 mm stroke unit, consider the neighbouring SGC bores: the SGC160 offers 10053 N push at 0.5 MPa, while the larger SGC250 provides 24543 N if your application demands more power. Because this model lacks the -S suffix, it has no internal magnet and cannot support magnetic sensors; if position feedback is required, select the -S variant or use external mechanical switches. The standard adjustable air cushion at both ends decelerates the piston near stroke end, but it does not function as a locking device. If the load must be prevented from drifting when air is lost or the valve is centered, you must install an external pilot-operated check valve or a dedicated rod lock.
Furthermore, extending a large bore over 900 mm creates a high risk of rod bending under side loads. Ensure adequate external guiding and rigid rod-end support to prevent premature seal wear and mechanical damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X900N FAQ
At 0.5 MPa, it provides 15708 N push and 15079 N pull force. At 0.7 MPa, push is 21991 N and pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-500 mm/s, uses a G3/4 port, and features an M36x2.0 rod thread.
No, because this specific SKU lacks the -S magnet option, it cannot accommodate CMSG, DMSG, or EMSG magnetic switches. You would need to specify the -S variant for magnetic sensing. Structurally, the unit uses four steel tie rods for rigidity and is dimensionally interchangeable per the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X900N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.