Airtac SGC Standard Cylinder SGC250X160SH
The AirTAC Airtac SGC Standard Cylinder SGC250X160SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 160mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ250 mm
- Stroke160 mm
- Port sizeG1
- Acting typeDouble acting
- Rod threadM42×2.0
- CushionAdjustable, 60 mm
About the Airtac SGC Standard Cylinder SGC250X160SH
Delivering massive thrust for heavy industry, this double-acting ISO 15552 tie-rod cylinder uses a 250 mm bore to generate 24543 N of push force at 0.5 MPa. Four steel tie rods clamp the aluminum barrel to the covers for exceptional rigidity under high stress, while the two-way piston seal maintains an internal oil reservoir for long service life. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without redesign.
The SH suffix equips this unit with a Viton (FKM) seal rated for 0-150 C environments, a necessary upgrade over standard NBR for hot operations. It includes a built-in piston magnet for CMSG, DMSG, or EMSG switches. Plan for about 14726 N of real work at 0.5 MPa, which means it lifts roughly 1251 kg vertically with a 2:1 safety margin. Air enters via the G1 port, and the 60 mm adjustable air cushions at both ends absorb kinetic energy near stroke end.
Airtac SGC Standard Cylinder SGC250X160SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC250X160SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø250mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 24544 N | 23562 N |
| 0.7 MPa | 34361 N | — |
| Max (@1.0 MPa) | 5006 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC250X160SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC250X160SH Is Used
Hot Foundry Press
Drives a heavy forging press in a foundry, utilizing the Viton H seal to withstand 150 C ambient heat while delivering 34360 N push force at 0.7 MPa.
Steel Slab Clamping
Actuates a massive clamping mechanism on a steel slab transfer line, where the 250 mm bore and 23562 N pull force secure heavy metal loads.
Heavy Injection Mold
Provides the high closing force required for a large industrial injection molding machine, relying on the rigid tie-rod build to prevent deflection.
Is the Airtac SGC Standard Cylinder SGC250X160SH the Right Cylinder?
Choosing this 250 mm bore means committing to the top of the SGC range, as there is no larger standard option; if 24543 N at 0.5 MPa is excessive, stepping down to the 200 mm bore yields 15708 N. For this 160 mm stroke, side-load risks are minimal, but always ensure the M42x2.0 rod thread is aligned correctly with your load. Remember that a plain cylinder drifts when air is lost or the valve is centered, as the cushions only decelerate the piston and do not act as a brake; install an external rod lock or pilot-operated check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC250X160SH FAQ
This 250 mm bore cylinder features a G1 air port and an M42x2.0 rod thread. It generates 24543 N push and 23562 N pull at 0.5 MPa, 34360 N push and 32986 N pull at 0.7 MPa, with a theoretical maximum force of 5006 kgf at 1.0 MPa.
Yes, the S suffix indicates a built-in magnet compatible with CMSG, DMSG, and EMSG switches. The body conforms to ISO 15552 mounting interface dimensions, so it accepts standard large-bore LB foot, FA flange, or TC trunnion accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC250X160SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.