Airtac SGCD Dual Rod Cylinder SGCD160X160
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD160X160 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD160X160
Delivering 9425 N of thrust in both directions at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses a twin-rod piston to equalize output force. The design guarantees about 5655 N of safe working load, easily lifting a 480 kg vertical mass with a 2:1 margin. Four steel tie rods clamp the aluminum barrel securely, while the G3/4 port handles high airflow.
Because a shaft exits both covers, the rod-side pressure area remains identical on extension and retraction. This symmetric layout prevents torsional twist during heavy strokes and lets you mount a sensor cam or secondary tool on the back end. The standard TPU seals handle -20 to +70 C, and swapping to Viton H extends heat resistance up to 150 C.
Airtac SGCD Dual Rod Cylinder SGCD160X160 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD160X160 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | 13195 N |
| Max (@1.0 MPa) | 2050 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD160X160
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD160X160 Is Used
Balanced Lift Stations
Hoists heavy 480 kg platens vertically without drift, relying on the equal push and pull thrust to keep loads level throughout the 160 mm travel.
Twin Tooling Transfer
Drives a primary gripper on the front rod while powering a secondary ejector cam on the rear rod, maximizing cycle efficiency.
Anti-Rotation Pressing
Prevents piston twist during heavy-duty forming tasks by using the dual shafts as a rigid guide for precise 9425 N pressing operations.
Is the Airtac SGCD Dual Rod Cylinder SGCD160X160 the Right Cylinder?
When sizing this double-acting unit, the 125 mm bore offers 5734 N each way, while the 250 mm bore provides 23562 N. Choose this 160 mm model when a project demands roughly 9425 N of perfectly balanced push and pull force. A twin-rod configuration is the right call for anti-rotation guidance, driving dual tooling stations, or maintaining a symmetric load path. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. Since this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors. For any stroke exceeding 500 mm, add external guide rails to prevent side-load binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD160X160 FAQ
The force is equal in both directions due to the double-rod design: 9425 N at 0.5 MPa, 13194 N at 0.7 MPa, and a maximum theoretical 1922 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a 1.5 MPa proof rating.
No, a plain cylinder drifts on air loss and the 50 mm adjustable cushions only decelerate near stroke end. For secure load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD160X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.