Airtac SGCD Dual Rod Cylinder SGCD160X400S
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD160X400S is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 400mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke400 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD160X400S
Delivering 9425 N of thrust in both directions at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses a twin-rod piston to equalize output force. The dual exiting rods create a symmetric load path that resists torsional twist, while the four steel tie rods clamp the aluminum barrel securely to the end covers. A built-in piston magnet comes standard on this -S variant for position sensing.
With a 400 mm stroke and a 50 mm adjustable air cushion at each end, it handles dynamic loads at 30-500 mm/s. The G3/4 port feeds the 160 mm bore efficiently. It yields a safe working load of roughly 5655 N, which translates to lifting about 480 kg vertically with a 2:1 safety margin. Standard TPU seals handle -20 to +70 C, while a Viton H option extends heat resistance to 150 C.
Airtac SGCD Dual Rod Cylinder SGCD160X400S Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD160X400S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 400 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | 13195 N |
| Max (@1.0 MPa) | 2050 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD160X400S
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD160X400S Is Used
Twin-Tool Indexing
Drives two opposing tooling heads simultaneously from a single actuator, utilizing the equal push and pull force to machine or form parts from both ends.
Balanced Vertical Lift
Lifts heavy platens up to 480 kg with a 2:1 margin, relying on the symmetric load path of the dual rods to prevent platen tilting during elevation.
Anti-Rotation Guiding
Holds a precision workpiece steady without rotational drift, using the two parallel rods as an integral anti-twist guide for high-precision pressing tasks.
Is the Airtac SGCD Dual Rod Cylinder SGCD160X400S the Right Cylinder?
This 160 mm bore sits between the 125 mm option (5734 N each way) and the 200 mm size (15079 N each way), giving you 9425 N of equal bidirectional force at 0.5 MPa. A double-rod design is the right call when you need anti-rotation stability, want to drive two tools simultaneously from one piston, or require a sensor cam on the back end. Mounting choices include FA, LB, TC, FTC, TCM1, and TCM2. The included -S magnet supports CMSG, DMSG, and EMSG switches. Because the 400 mm stroke generates leverage, always use an external guide to support side loads and prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD160X400S FAQ
Because the rod exits both ends, force is equal in both directions: 9425 N at 0.5 MPa and 13194 N at 0.7 MPa. The theoretical maximum is 1922 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a 1.5 MPa proof pressure.
No, the air cushion only decelerates the piston near the stroke end and does not act as a brake. On air loss, the piston drifts. For vertical load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD160X400S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.